home *** CD-ROM | disk | FTP | other *** search
/ TPUG - Toronto PET Users Group / TPUG Users Group CD / TPUG Users Group CD.iso / CRS / crs59.d81 / lmedit.sfx / lasermatrix edit (.txt) next >
GEOS ConVerT  |  1990-02-12  |  9KB  |  162 lines

  1. LASERMATRIX Edit
  2. SEQ formatted GEOS file V1.0
  3. Comm. Compat.
  4. COMM 1351
  5. LASERMATRIX SG10
  6. Letter
  7. LM text
  8. LM edit text
  9. L.M. EDITOR V1.0
  10. Bill Prendergast
  11. The LASERMATRIX Editor will
  12. reconfigure a LASERMATRIX
  13. driver for another printer.
  14.  ."LE
  15.  :"Lr
  16.  :"Lh
  17.                  
  18. LASERMATRIX
  19.               PRINTER DRIVER EDITOR
  20. This program configures a LASERMATRIX Printer Driver
  21. to match your printer.
  22. LASERMATRIX Driver and Editor written by:
  23.                 Bill Prendergast
  24.                 RD1, Box 11A
  25.                 Conklin, NY,  13748
  26. (Please send $5.00 if you like the LASERMATRIX Driver!)
  27. LASERMATRIX
  28.  Printer Driver works with certain
  29. types of bit-mapped graphics capable printers.
  30. The following pages will ask you for certain
  31. parameters and ASCII escape code sequences that
  32. are unique for your printer.
  33. For each entry, consult your printer's manual for the 
  34. proper codes to use.  If your printer is not capable
  35. of a listed function (other than NLQ printing) then the
  36. driver will not work on your printer.
  37. All printer escape codes are ASCII characters entered
  38. as DECIMAL numbers, seperated by commas.  Press
  39. <RETURN> after entering a code sequence.
  40. Note:
  41.  - ASCII codes range from 0 to 255
  42.  - No characters other than numbers and commas
  43.    are allowed
  44.  - Each printer function is initiated by a sequence
  45.    of no more than 16 ASCII codes
  46. Please insert a disk containing a 
  47. LASERMATRIX
  48. Printer Driver to be copied...
  49. This file will not be altered.  A new one will be
  50. created.
  51.  Enter 
  52.  LASERMATRIX Driver name:
  53. Filename entered is NOT acceptable or file already
  54. exists!
  55. Enter 
  56.  LASERMATRIX Driver name:
  57.  normally sends 80 8-dot wide cards to the
  58. printer.  Some printers have different capabilities for
  59. printing width in normal density mode (60, 72, 80
  60. dots/inch density).  Please enter your printer's width
  61. (in 8-dot cards) for 
  62. NORMAL
  63.  density printing.
  64. Select 60, 80, or enter a width:
  65. 60 Cards
  66. 80 Cards
  67. There is an error in the number entered!
  68. Remember:
  69.   - Numbers range from 0 to 255.
  70.   - No other characters are accepted.
  71.   - Only 1 number is allowed.
  72. Select 
  73. 'PREVIOUS'
  74.  to continue:
  75. Please enter the length of your printer's page
  76. in 8-dot high cards:
  77. 90 Cards
  78.  can also send ASCII text to the printer.  This
  79. is used for draft documents and prints in your
  80. printer's usual dot matrix font.
  81.  fonts and graphics, the 
  82. LASERMATRIX
  83. Driver uses graphics mode printing.
  84. Select ASCII capability, if desired:
  85. Graphics Only
  86. Graphics/ASCII
  87. LASERMATRIX
  88.  Driver uses your printer's highest
  89. print density.  The driver's interpolation routines
  90. require that the high density mode be a multiple of
  91. 2 or 3 times the printer's normal density, usually
  92. 60, 72, or 80 dots/inch.
  93. Examine the print density capabilities in your printer's
  94. manual and choose your printer's highest density
  95. that is a multiple of the normal low-density
  96. capability...
  97. Select the print density multiple below.
  98. For example:
  99.       60 dpi/120 dpi:  DOUBLE
  100.       72 dpi/144 dpi:  DOUBLE
  101.       80 dpi/240 dpi:  TRIPLE
  102. Combinations such as 72/240 (TRIPLE) will work, but
  103. will have a different width-to-height ratio than the
  104. screen.
  105. DOUBLE
  106. TRIPLE
  107. Enter the sequence of escape codes to initialize
  108. your printer.
  109. This should include:
  110.  - Code to reset the printer to a power-on state
  111.  - Code to set the normal line feed amount to 
  112.    the height of JUST the 8-row printhead.  On
  113.    many printers, this amount is 7/72 inches
  114. Some printers produce better output if set to
  115. unidirectional printing.  Include codes for this
  116. if desired:
  117. There is an error in the line entered!
  118. The problem is in the area highlighted below.
  119. Remember:
  120.   - ASCII codes range from 0 to 255
  121.   - Codes are seperated with commas
  122.   - No other characters are accepted
  123.   - Only 16 ASCII codes are allowed
  124. Select '
  125. PREVIOUS
  126. ' to continue:
  127. Enter the escape code sequence to print a line of
  128. dot graphics output using the HIGHEST DENSITY
  129. mode selected.  This sequence should tell the printer
  130. to expect '
  131. ' 8-dot vertical graphics bytes to follow,
  132. Where:
  133.          
  134. X = 8 * C * D
  135.  is the number of cards selected for printer width,
  136.  is the density multiple selected, 2 or 3.
  137. Enter the escape code sequence to send a
  138. HALF-DOT-LINE line feed command to the printer.
  139. This should be the printer's smallest available
  140. line feed amount (near 1/120 inch or less):
  141. Enter the escape code sequence to initialize the
  142. printer for ASCII printing.
  143. This is typically a reset to the power-on state, and,
  144. if desired, changes to the default printer font, pitch,
  145. and line feed settings:
  146. Does your printer have an internal Near-Letter-
  147. Quality (NLQ) mode available?
  148. Enter the escape code sequence to initialize the
  149. printer's NLQ printing mode:
  150. Select '
  151. ' to write the new driver, or
  152. PREVIOUS
  153. ' to change parameters:
  154. The new 
  155. LASERMATRIX
  156.  Printer Driver is ready!
  157. Use 'Select Printer' to choose the new driver before
  158. printing.
  159. An error occured when accessing the disk!
  160. Check available disk space and try again.
  161. LASERMATRIX V1.0
  162.